In this article we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and techniques that you can use.

For those who have a dog that likes to bark, and particularly if your dog loves to play in the garden and other regions of the house, you need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up that will look a little scary at first, but it’s actually quite straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not just cut a rectangular shape from the cardboard, so you will have to oxygen mask for dog cut around the edge of the mask so that you get something which looks like a cone. The main thing here is to be realistic with what type of paper plate that you’re using.

Then you will have to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so you can ensure that nothing will leak when you place the mask on. Make sure that the edges are cut so that the edges are not sharp, as this can damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You will want to start with one side of the mask first, so that you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.

Don’t fret too much about the paint getting stuck to your mask. It’s easy to eliminate it later, and it’ll leave you with a wonderful finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint once you are done, so that you don’t end up with smudges or smears on your dog.

Then it is time to glue the mask on your dog’s head. First you need to make sure that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you may start to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask and fold it over. Make certain it’s quite powerful and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you have the mask snugged firmly onto the face of your dog. Don’t make the folds too big or else it might look messy. As soon as you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask on the dog. Be sure that the ears are level and be certain it’s not too short or long as this can cause some issues with the mask slipping off the dog’s face.

If you are using a dog mask because your pet security, you’ll have to do some sanding to be certain it’s safe on your dog. You can accomplish this by sanding off any excess paper that may have been removed from your mask.